/wiki/spaces/VisionLidarFR2017/pages/9601026

This function configures and records a path to be displayed on the screen and will replay it in a loop. The function is only available via the toolbar and is displayed as the following two icons (the camera icon and the blue triangle icon):

First of all, the camera icon will open the “Camera path” window which controls the recorder. 3 options are available:

By camera movement: Clicking on “Save” will close this window and it will start recording any movements made in the main view. Clicking on the camera icon a second time will stop the recording.
By alignment: If an alignment exists in the database, it will appear in the dropdown list. The camera path will follow the chosen alignment following the elevation and pitch of the camera that has been set.
By picking points: The user will pick points in the point cloud to create the path. Upon clicking “Pick points”, the camera path window will close and the user must pick points on screen to designate the camera path. The camera will follow the picked path following the elevation and pitch of the camera that has been set.

A video file of the playback can be saved by selecting “Create video file”. The “Uncompressed” option will save the video as an uncompressed AVI file. If the “Uncompressed” option remains unchecked, a prompt will allow the user to select the compression method to be used.

The path can then be viewed with the blue triangle icon. If the “Create video file” option was checked, a prompt will appear to save the video file. Once the file folder and filename is determined, the playback will begin and the video recording will mirror what is being played. The playback and recording will stop when the blue triangle icon is pressed again. The viewing speed can be accelerated with the Shift + 0 keys or slowed with the Shift +9 (keep the keys pressed for a speed change).