Menu: Explorer / Objects / Cylinders
Cylinders are can be generated either individually from the toolbar (see below), either with the picking cylinders tool (Menu: Survey / Pick cylinders) or with the cylinder batch detection tool (Menu: Analyze / Cylinders). Any detected cylinders will appear in the objects tab of the explorer under the type cylinders.
A few options are available in the cylinders' toolbar - see their description herebelow:
| Icon | Description |
|---|---|
| Deletes all selected cylinders |
| Adds a cylinder individuallyat a time; the user must click on a cylindrical object on the screen |
| Invites the user to click on a cylinder to be identified on screen; the cylinder in question will be highlighted in the list |
| Filters the list of cylinders to show only horizontal, vertical or specifically named cylindersvertical cylinders with a specific name. |
| Exports the selected cylinders to DXF, shapefile, MapInfo, GeoJSON or KML format |
Each object can be expanded to display extra additional information:
- Center XY: The XY center is the planimetric center of the cylinder. This coordinate was detected and cannot be changed afterwards.
- Center Z: The Z center is the elevation of the the cylinder base of the cylinder. If the elevation detected needs to be modifiedchanged, it is possible to repick this point by clicking on
and picking an elevation on the screen. - Direction: The direction of the cylinder is displayed here. The direction may be repicked by clicking on and clicking as well as on the high point of the cylinder on the screen. The direction will then be modified.
- Height: The height of the cylinder may be repicked by clicking on and clicking as well as on the high point of the cylinder on the screen.
- Radius: The This value of the radius of the cylinder . This value can be modified by entering a new value in the field.
- Angle: The angle of the cylinder is displayed here.
A contextual menu also presents a few extra also shows several other features. This menu is available by right-clicking on a specific cylinder, and offers a few extra options:
- Check all/uncheck all to select/deselect all cylinders
- Remove current to delete the current cylinder
- Colorize points by distance launch the "Color by cylinder deformation" function
