Menu: Tools / Image to scan / Control points
In this menu you will add GCPs to your photo to georeference your project so your point cloud is at the exact coordinates as reality. Note that you only need to perform the GCPs edition only if your photos do not have any coordinates already. If your photos have GPS coordinates already, skip this step or it will only create distorsion within the point cloud orientation.
To edit the GCPs, you need first to attribute GCPs to your images. To do so, double-click an image in you image list for which you have a GCP, then click on the image where the GCP and give it a number to identify it later. Note that for each GCP you need to click on at least two differents images. Which you can control by looking at the "#obs" in the table below (must be at least 2).
Then you will have to enter the coordiante for each GCP you picked by going in "Control Point / Edition", which will open the window below. You will have to enter the coordinates in all X/Y/Z cells for each GCP. If for some reason you are not satisfied or have misclick some GCPs, you can delete them in ''Control Point / Delete All''.
Once the coordiantes are entered, go to "Point Cloud / Generate in VisionLidar", to start the point cloud generation. Once done the software will ask you if you want to open the project.