Skip to end of banner
Go to start of banner

Volume computation

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Version française


Menu: Tool / Volume Computation


With this new tool it is even easier and faster than ever before to do volume calculation. You will be able to preform the computation directly from the scan(s).  Here is the list of parameters for "Volume Computation".

First, "Scan selection" in which you will select the mode of "Volume computation" you want to perform.

  • From two scans: Perfect to calcul volume as a scan to scan comparaison. Just make sure you select the scan in the proper order (wrong date order will result in an inversion between the "Fill" and "Excavated" value
  • From one scan: When you want to do "volume compatutaion" directly from your scan such as calculate stockpiles volume.


Second, "Volume params" which will determined the way the calculation will carry out.

  • Boundary computation algorythm: You can choose between "Concave hull" which will follow exterior of the scan as close as possible to create the outline or  "Convex hull" which will link the extremities of the scan together to create the outline
  • Geometric operator: You can choose between "Intersec" wich will consider the points in the scans within the intersection of both of them (to be selected when doing volume calculation "From one scan" or "Union" which will take all the points present in both scans (like a merge)
  • Swell factor: If you have a swell factor, you can put it here to have a more precise result. Very usefull when you do road work for exemple.
  •  



  • No labels